User`s guide

Chapter 4: Peripheral Devices
4-4 Digital HiNote VP 500 Series
Connecting a Printer to the Parallel Port
To connect a parallel device to the notebook, you need the standard 25-pin connector parallel
cable mentioned earlier. Check the documentation that came with the equipment to see if you
need to make any adjustments to the equipment before using it. Connect a printer to the
notebook as follows.
1. Connect the printer signal cable to the parallel port on the rear of the notebook.
Tighten the thumb screws (Figure 4-2, step 1).
2. Connect the printer’s power cord to a wall outlet after ensuring the printer is
turned off (Figure 4-2, step 2).
3. Turn on the printer .
Figure 4-2: Connecting a Printer