User`s guide

Chapter 6: Expansion and Option Devices
Digital HiNote VP 500 Series 6-21
1. Locate the audio-in port on the rear side of the Replicator.
2. Depending on the signal cable which you are using, you may or may not need
an adapter.
3. Insert the round cable connector into the audio-in port.
Connecting the Notebook
By inserting your notebook into the Minidock Port Replicator, and by connecting peripheral
devices (a keyboard, mouse, monitor, printer, etc.) to the Minidock’s rear side, your Digital
HiNote VP 500 series notebook turns into a fully functional desk-top PC.
Your notebook can be hot-plugged into the Minidock. This means that you do not have to turn
off the notebook before connecting it to the Minidock.
_____________________________Caution_____________________________
Although you may be able to insert other notebook computers into the Minidock, it is
strongly recommended you do not use the Minidock with any other notebooks before
checking with your Digital notebook dealer. This could result in severe electrical
damage to the Minidock and your notebook.
_________________________________________________________________
You may want to refer to Figure 6-14 and Figure 6-15 as you read these instructions for a visual
guide to connecting the notebook to the Minidock.
Before connecting the notebook, you may find it more convenient to first connect the desired
peripheral devices to the Minidock and then connect it to AC power.
If no peripheral devices are connected to the notebook, there is no need to turn off the notebook
since it can be hot-plugged into the Minidock. However, it is recommended that you save your
data and close the LCD lid.