User`s guide

Troubleshooting
7-7
Audio and IR Troubleshooting
Problem Possible Cause Action
Sound is not
working.
Configuration problem.
Audio volume needs to
be increased.
From the Windows Control Panel double-
click the System icon and verify the sound
device is properly configured and the drivers
are loaded.
Press [fn] + [F7] to turn on the internal
audio feature.
Adjust audio volume with the volume
control hot keys (Chapter 1).
File does not
transfer.
Your FIR port is located
too far from the other
device’s Infrared
accessory.
FIR port is not on the
same plane with your
desktop computer’s
Infrared accessory.
FIR port in disabled.
Position your notebook closer to the other
device’s Infrared transceiver.
Make sure your notebook computer’s FIR
port is in a direct line with your target
computer’s Infrared accessory. Refer to
your target computer’s Infrared
documentation for more information.
Press [fn] + [F3] to enter the System Setup
and enable the FIR port. Refer to Chapter 4
if you require additional information about
System Setup.