User`s guide

Expansion Devices and Options
6-4
4. Align the notch in the 3.3v EDO memory module with the plastic tab in the memory
cradle (Figure 6-2, step 1).
5. Install the memory module by inserting it at an angle into one of the two sockets
(Figure 6-2, step 2). Make sure the module is firmly seated in the socket.
6. Press the module down until it snaps into place (Figure 6-2, step 3).
7. Replace the memory compartment cover and press around the edges to make sure it is
properly seated.
DEC01144
Figure 6-2 Installing Memory