User`s guide

Configuring Your Computer
4-7
Device Features
Feature Settings Comments
Serial Port Disabled
Auto*
Manual
Disables the onboard Serial Port.
Enables and automatically configures the port.
Enables and allows you to manually configure
the I/O address and Interrupt Request (IRQ)
line for the port.
InfraRed
Port
Disabled*
Auto
Manual
Disables the onboard Infrared Port.
Enables and automatically configures the port.
Enables and allows you to manually configure
the I/O address and Interrupt Request (IRQ)
line for the port.
Parallel
Port
Disabled
Auto*
Manual
Enables or disables the onboard Parallel Port.
Enables and automatically configures the port.
Enables and allows you to manually configure
the I/O address and Interrupt Request (IRQ)
line for the port.
Parallel
Port Mode
Standard
Bi-directional (PS/2)*
Enhanced Parallel Port (EPP)
Extended Capabilities Port
(ECP)
Selects other high performance modes that
may be supported by your printer or other
parallel port devices. See your device User’s
Guide for details.
Audio Disabled
Auto*
Manual
Disables the onboard Stereo Audio.
Enables and automatically configures the
onboard audio.
Enables and allows you to manually configure
the I/O addresses, Interrupt Request (IRQ)
line, and DMA channel for the onboard audio.
Joystick Disabled
Auto*
Manual
Enables or disables the Joystick port on the
DIGITAL HiNote Ultra Multimedia Dock.
Enables and automatically configures the port.
Enables and allows you to manually configure
the I/O address for the port.
*Factory default setting
___________________________Note ____________________________
It is highly recommended that you use the Auto configure setting. If you must
manually configure a device, it is recommended that you use the “System”
application located in the Windows “Control Panel.”
____________________________________________________________