User`s guide

Getting Started
2-2
To power the notebook using the supplied Universal AC Adapter, refer to the following
instructions:
1. Connect the Universal AC Adapter to the AC input on the notebook computer
(Figure 2-1, step 1). The arrow on the connector should be on top.
2. Plug the power cord into the AC Adapter (Figure 2-1, step 2).
3. Plug the power cord into a working electrical outlet (Figure 2-1, step 3).
4. After you have plugged the notebook into its power source, press the Suspend/Resume
(Power) button to turn the notebook computer On (Figure 2-2).
If the notebook does not power up, check the connections between the Universal AC
Adapter and the notebook computer. If the notebook computer still does not power up,
please refer to the chapter on “Troubleshooting.”
DEC01150
Figure 2-1 Connecting the Universal AC Adapter