Technical data

System Restoration
2-22
Xircom Ethernet/Modem Combo Card Driver
If your system features an internal Xircom Ethernet/Modem
Combo Card, do the following:
1. When Windows 95 reboots the Standard PCMCIA Card
Modem Update Device wizard appears. Replace the
Diskette Drive Module with the CD-ROM Drive, insert
the DIGITAL HiNote Ultra System CD and then click
[Next].
2. Do NOT click [OK] to install the driver found in the INF
folder. Click [Other Locations].
3. In the Copying files from dialog box, type
X:\drivers\win95\Xircom (where X is the drive letter
assigned to the CD-ROM drive) and click [OK].
4. Click [Finish].
5. The Insert Disk window will appear prompting you to
insert the disk labeled “Disk1: Installation Disk for
Xircom CreditCard 10/100+Modem 56”. Click [OK].
6. When the Copying Files window appears stating the file
CEM56.SYS could not be found, type
X:\drivers\win95\Xircom (where X is the drive letter
assigned to the CD-ROM drive) and click [OK].
7. Windows will build a Drivers Information Database, then
detect the Modem of Xircom CreditCard 100+56. A
Location Information window will appear. Enter your
area code and any other pertinent information. When
finished, click [OK].
8. Windows will detect the Network of Xircom CreditCard
10/100+Modem 56. Then a Network window will appear
stating that you must provide computer and workgroup
names that will identify your computer on the network.
Click [OK].