Technical data

System Restoration
2-19
PCMCIA Drivers
1. When the notebook reboots and no new devices are
detected, double-click the System icon in Control Panel.
Then select the Device Manager tab.
2. Double-click on the Cirrus Logic PCIC compatible
PCMCIA controller option listed under PCMCIA socket.
3. When the Properties window appears, remove the
check mark in the box next to Disable in this hardware
profile. Then click [OK].
4. Windows will present a dialog box to install the 32 bit
PC Card drivers. Select [No], then click on the [Next]
button.
5. A second dialog box will appear. Select [No] again then
click on the [Next] button. Then click on the [Finish]
button.
6. You will be prompted whether or not to reboot the
notebook. Select [No].
7. Repeat steps 2-6 for each remaining device listed under
PCMCIA socket. After the last device is configured
accordingly, close all open windows and choose [Yes]
when prompted to restart the system.