Technical data

System Restoration
2-17
5. After disabling the CD-ROM boot option and the system
is booted, the Windows 95 boot screen will appear. Hit
any key to continue and then follow the on-screen
instructions.
6. When prompted for type of installation, choose Typical.
7. When the Analyzing Your Computer window appears,
do NOT select any additional devices for detection from
the list provided.
8. When prompted with the Windows Components
window, select the Most Common Components option.
When Windows 95 installation is complete, any
additional components can be installed using the
Add/Remove Programs wizard via the Control Panel.
9. When prompted to make a Windows 95 Startup
diskette, it is strongly recommended to do so. You will
need a blank formatted 1.44 MB diskette for this
operation.
10. At the completion of this phase of the Windows 95
installation, you will be prompted to select [Finish] to
restart the computer so the changes can take effect.
11. The Windows 95 boot screen will appear and the
system will continue the installation process. Follow the
on-screen instructions and reboot the system when
prompted.
Installing System Drivers
IDE CMD Driver
1. After the system reboots and the Windows 95 desktop
appears, select Start from the Windows 95 task bar.
2. Select Run and when prompted with the Run dialog box
enter C:\CMD\Setup and click [OK].