Technical data

System Restoration
2-16
5. To Format other drive partitions that may have been
created in step 2, choose option 5 to exit to the DOS
prompt. Enter the following command line: FORMAT X:
/U, where X is the drive letter assigned to the drive
partition to be formatted. Repeat this step for each
additional partition.
6. To re-enter the bootable System CD menu, type MENU
and press the Enter key.
7. Choose option 4, “Prepare to install Microsoft Windows
from CD onto a newly formatted hard drive” to copy all
necessary CD-ROM and system startup files to the C:
drive.
8. Power down the system.
Windows 95 Installation
1. Place the Windows 95 OSR 2.0 CD that was packaged
with the unit into the CD-ROM Drive and boot the
system.
2. At the DOS prompt enter 95-INST X:, where X is the
drive letter assigned to the CD-ROM. The necessary
system files will be copied from the CD to the hard drive.
3. Once all the Windows 95 files have been copied to the
hard drive, power down the system and replace the CD-
ROM Drive Module with the Diskette Drive Module.
Ensure that the Diskette Drive contains no diskettes and
both CardBus slots are empty.
4. Power on the system. When prompted press the [fn] +
[F3] key combination to enter the Setup Utility. Disable
CD-ROM Boot Option. Save changes and Exit. The
notebook will reboot. Refer to the DIGITAL HiNote Ultra
2000 User’s Guide for detailed instructions on
configuring the Setup Utility.