Technical data

System Restoration

2-11

This procedure assumes the DIGITAL HiNote Ultra 2000 Media

Dock is not attached to the notebook.

1. Ensure that the notebook is powered off and insert the

CD-ROM Drive Module.

2. Power on the system.

3. Enter the System Setup Utility by pressing the [fn] + [F3]

key combination during POST ( Power On Self Test).

4. Enable the CD-ROM Boot option in the System menu.

5. Place the Windows NT CD into the CD-ROM Drive.

6. Then select the Save & Reboot option from the Exit

menu to save changes and exit the System Setup

Utility.

7. The system will boot from the Windows NT CD and

Windows NT Setup Program interface will appear.

8. Install Windows NT as described in the Microsoft

Windows NT Workstation user's guide that was

packaged with your system.

9. When Setup is complete, remove the Windows NT CD

and insert the DIGITAL HiNote Ultra 2000 System CD.

Click on Start then Run and type X:\CDInstall, where X

is drive letter assigned to the CD-ROM drive. Follow the

on-screen instructions to install the desired applications,

interactive User documentation and all system drivers.

NOTE: Internet Explorer is not included on the System

CD. If you wish to install this application, it can be

download from Microsoft’s web site: