Technical data

System Restoration
2-7
Installing System Drivers
IDE CMD Driver
1. After the system reboots and the Windows 95 desktop
appears, select Start from the Windows 95 task bar.
2. Select Run and when prompted with the Run dialog
box enter C:\CMD\Setup and click [OK].
3. The program will ask you if you wish to continue the
installation. Select [Yes] to continue. Depending on
the speed of the system, the message “Saving the
Windows 95 Registry” may pause a short while before
continuing.
4. After all files are copied, the program will ask you if you
wish to restart the notebook. Select [Yes].
5. After the notebook reboots, Windows 95 will declare
that it found a new device and install the necessary
drivers. When prompted, select [Yes] to reboot.
PCMCIA Drivers
1. When the notebook reboots and no new devices are
detected, double-click the System icon in Control
Panel. Then select the Device Manager tab.
2. Double-click on the Cirrus Logic PCIC compatible
PCMCIA controller option listed under PCMCIA socket.
3. When the Properties window appears, remove the
check mark in the box next to Disable in this hardware
profile. Then click [OK].
4. Windows will present a dialog box to install the 32 bit
PC Card drivers. Select [No], then click on the [Next]
button.