Technical data

System Restoration
2-4
NOTE: If you choose Yes to enable large disk support
(FAT32) and want to install WinNT or a WIN95 non-
SR2 operating system at a later time, you will have to
repeat the complete Windows 95 System Restoration
procedure and enable FAT16.
3. Reboot the system. When prompted press the Space
bar to continue and the action menu will appear.
4. Choose option 3 to Format the C: partition of your hard
drive.
5. To Format other drive partitions that may have been
created in step 2, choose option 5 to exit to the DOS
prompt. Enter the following command line: FORMAT
X: /U, where X is the drive letter assigned to the drive
partition to be formatted. Repeat this step for each
additional partition.
6. To re-enter the bootable System CD menu, type
MENU and press the Enter key.
7. Choose option 4, “Prepare to install Microsoft Windows
from CD onto a newly formatted hard drive” to copy all
necessary CD-ROM and system startup files to the C:
drive.
8. Power down the system.
Windows 95 Installation
1. Place the Windows 95 OSR 2.0 CD that was packaged
with the unit into the CD-ROM Drive and boot the
system.
2. At the DOS prompt enter 95-INST X:, where X is the
drive letter assigned to the CD-ROM. The necessary
system files will be copied from the CD to the hard drive.