Technical data

Parts Replacement
DIGITAL HiNote Ultra 2000 Service Guide
4–35
Status Display
To remove the Status Display:
1. Remove the Display Bezel (Figure 4-29).
2. Disconnect the Status Display cable from the Status Display.
3. Remove the screw in the lower right corner of the Status Display.
4. Remove the Status Display.
Backlight Inverter
To remove the backlight inverter:
1. Remove the Display Bezel (Figure 4-29).
2. Remove the Status Display.
3. Remove the screw located in the lower left corner of the inverter.
4. Remove the Inverter Assembly.
5. Disconnect the two cables connected to the invert and remove the inverter.