Technical data

Parts Replacement
4–28
DIGITAL HiNote Ultra 2000 Service Guide
14.1 inch Display Bezel
To remove the 14.1 inch LCD Display Bezel:
1. Remove the LCD Display and the Keyboard Deck (Figure 4-7, Figure 4-8, Figure 4-9,
Figure 4-10).
2. Remove the two rubber fillers on the lower section of the LCD Display Bezel
(Figure 4-29).
3. Remove the two screws that secure the LCD Display Bezel to the LCD housing.
4. Grasp the bottom of bezel from the inside edge and carefully pull towards the outside to
release the catches. Carefully separate the bezel from the housing (Figure 4-29).
a) Release the lower right corner of the bezel.
b) Release the lower left corner of the bezel.
c) Carefully separate the rest of the bezel by working your fingers around the inside
of the bezel.
____________________________ Caution __________________________
Be careful when removing the bezel. Excessive pressure can cause the
bezel to crack.
______________________________________________________________