Technical data

Parts Replacement
4–22
DIGITAL HiNote Ultra 2000 Service Guide
Removing the RTC and Bridge Batteries
To remove the RTC battery:
1. Remove the Keyboard Deck (Figure 4-7, Figure 4-8, Figure 4-9, Figure 4-10).
2. Disconnect Audio Cable.
3. Disconnect the RTC battery cable from the Daughtercard (Figure 4-15).
4. Remove one screw from the battery clamp and remove the clamp (Figure 4-23).
5. Disconnect the Bridge battery cable from the DC-to-DC Converter (Figure 4-24).
6. Remove the batteries.
Figure 4-23 Removing the Battery Clamp
Figure 4-24 Disconnecting the Bridge Battery