Technical data

Parts Replacement
4–18
DIGITAL HiNote Ultra 2000 Service Guide
Removing the Motherboard
To remove the Motherboard:
1. Remove the Keyboard Deck (Figure 4-7, Figure 4-8, Figure 4-9, Figure 4-10).
2. Remove the Daughtercard (Figure 4-15, Figure 4-16, Figure 4-17).
3. Disconnect the LED cable (Figure 4-18).
4. Disconnect the Lid Switch cable (Figure 4-18).
5. Disconnect the RJ11 cable (Figure 4-18).
6. Disconnect the I/O Panel cable (Figure 4-18).
7. Remove the five screws that secure the Motherboard. Make note of location, size, and
length of each screw (Figure 4-19).
8. Hold the I/O Panel connector out of the way and lift the Motherboard by the Cardbus
Assembly. Carefully wiggle the Motherboard to release if form the DC-to-DC Converter
connector (Figure 4-19).
Figure 4-18 Disconnecting the I/O Panel and UMI Cables