Technical data

Parts Replacement
4–16
DIGITAL HiNote Ultra 2000 Service Guide
Removing the Daughtercard
The Daughtercard provides the Video, Audio, and BIOS functions. To remove the
Daughtercard:
1. Remove the Keyboard Deck (Figure 4-7, Figure 4-8, Figure 4-9, Figure 4-10).
2. Disconnect the RTC battery and Audio cables (Figure 4-15).
3. Disconnect the speaker, and docking cables (Figure 4-16).
4. Remove the two screws that hold the Daughtercard in place (Figure 4-17).
5. Lift up on the Daughtercard to remove (Figure 4-17).
______________________________Note ___________________________
To install the Daughtercard:
1. Connect the RTC battery cable
2. Align the Daughtercard and Motherboard connector and install the
Daughtercard.
3. Connect the audio, speaker, lid switch, and docking cables.
______________________________________________________________
Figure 4-15 Disconnecting the RTC Battery