Technical data

Parts Replacement
DIGITAL HiNote Ultra 2000 Service Guide
4–11
13. Remove the four hinge screws at the back of the Keyboard Deck (Figure 4-10).
14. Grasp behind the Touchpad and pull up on the Keyboard Deck to release the UMI
connector.
______________________________ Note ___________________________
1. When reassembling the system, connect the UMI cable to Daughtercard
before replacing the Keyboard Deck.
2. Reconnect the two LCD cables.
3. Before replacing the Keyboard Deck screws, attach the AC adapter and
verify that the system powers up.
4. Make a visual inspection of the connections before replacing the screws.
______________________________________________________________
15. Flip the PC Card ejectors out and lift the LCD Display and Keyboard Deck up and away
from the rest of the system unit.
16. To separate the Keyboard Deck and LCD Display, carefully maneuver each cable through
its the opening in the Keyboard Deck.
_____________________________Caution__________________________
Be careful not to crease the cable when you fold it over.
______________________________________________________________
Figure 4-10 Removing LCD Assembly Hinge Screws