Technical data

Parts Replacement
4–10
DIGITAL HiNote Ultra 2000 Service Guide
9. Turn the system unit over so the bottom is up. Remove the two rubber feet and seven
screws (Figure 4-9). Note: one screw is located in the battery compartment.
10. Turn the system unit over so the top is up and open the LCD Display.
11. Remove the eight screws that hold the keyboard deck and LCD and Audio cables in place
(Figure 4-9). Note: the LCD and Audio cables are secured to the top of the DC-to-DC
Converter.
12. Disconnect the two LCD cables from the Motherboard and the Daughtercard.
Figure 4-9 Removing Keyboard Deck Screws