Technical data

System BIOS
2–10
DIGITAL HiNote Ultra 2000 Service Guide
Setting/Changing the Supervisor Password
Perform the following steps to set or change the Supervisor password:
1. Turn On your notebook computer.
2. After Power On Self-Test (POST) successfully completes, press [fn] + [F3] to access
System Setup.
The System Setup main menu appears on the screen.
3. Highlight the Security Setup menu and press [Enter].
4. Highlight the Set Supervisor Password field and press [Enter].
5. Type in up to an eight character Supervisor password and press [Enter].
To confirm, type in your Supervisor password a second time and press [Enter].
______________________________Note ___________________________
If a password already exists, you will be prompted to enter the old password before
a new one can be set.
______________________________________________________________
6. Select the Exit menu and choose Save to save your new settings and exit System Setup.
When you access System Setup, you are prompted for the Supervisor password.
Deleting the Supervisor Password
To delete a previously set Supervisor password and disable the feature:
1. Open the Supervisor Password dialog box.
2. With the cursor in the “Enter new password” field, press [Enter].
3. The cursor will move to the “Re-enter new password” field. Press [Enter].
4. When the Notice dialog box appears notifying you that changes have been saved, press
[Enter].
5. Select the Exit menu and choose Save to save your new settings and exit System Setup.
Dock Security
Setting a User password and enabling Dock Security password protects the undocking of
options from the system. When a request is made to undock an option such as the DIGITAL
HiNote Ultra Multimedia Dock, you will be prompted for a password. Enter either the User or
Supervisor password (if set) to complete the undock request and undock the option.