Technical data

System BIOS
DIGITAL HiNote Ultra 2000 Service Guide
2–9
5. Type in up to an eight character User password and press [Enter].
To confirm, type in your User password a second time and press [Enter].
______________________________ Note ___________________________
If a password already exists, you will be prompted to enter the old password before
a new one can be set.
______________________________________________________________
6. Select the Exit menu and choose Save to save your new settings and exit System Setup.
Depending on the settings of the Password Mode and Dock Security features, your
notebook computer will prompt you for a password each time it powers on, resumes
operation, or when you request to remove a docked option.
Deleting the User Password
To delete a previously set User password and disable the feature:
1. Open the User password dialog box.
2. With the cursor in the “Enter new password” field, press [Enter].
3. The cursor will move to the “Re-enter new password” field. Press [Enter].
4. When the Notice dialog box appears notifying you that changes have been saved, press
[Enter].
5. Select the Exit menu and choose Save to save your new settings and exit System Setup.
Supervisor Password
Your notebook computer has a Supervisor password option that you can set to prevent
unauthorized access to the System Setup. If you set a Supervisor password, you need to enter it
each time you want to access the System Setup.
______________________________ Note ___________________________
The Supervisor password can be used in place of the User password.
______________________________________________________________