Technical data

System BIOS
2–8
DIGITAL HiNote Ultra 2000 Service Guide
Notebook Computer Security
Notebook Computer Security is important to avoid theft or accidental loss of your computer
software and hardware. The DIGITAL HiNote Ultra 2000 provides the following levels of
protection:
• User Password – Used to prevent unauthorized access to files on your notebook computer
and unauthorized removal of a docked option.
• Supervisor Password – Used to prevent unauthorized access to your notebook computer’s
System Setup.
• Dock Security – Utilizes the User or Supervisor password to allow a docked device to be
undocked. Requires a User password be set.
____________________________ Caution __________________________
It is important that you remember your User and Supervisor Password
after you have set one on your notebook computer. If you forget the
password and want to have it reset, you must send the notebook
computer along with proof of ownership to a DIGITAL Service Center
for service.
______________________________________________________________
User Password
Your notebook computer has a User password that you can set to prevent unauthorized access
to your notebook computer files and unauthorized removal of a docked option.
Setting/Changing the User Password
Perform the following steps to set or change the User password:
1. Turn On your notebook computer.
2. After POST successfully completes, press [fn] + [F3] to access System Setup.
The System Setup main menu appears on the screen.
3. Highlight the Security Setup menu and press [Enter].
4. Highlight the Set User Password field and press [Enter].