Technical data

System BIOS
DIGITAL HiNote Ultra 2000 Service Guide
2–7
Security Features
Feature Settings Comments
Set User
Password
Enter a password of up
to eight alphanumeric
characters.
This option allows you to set a User
Password that will be required during:
System Boot, Resume, and Undock
operations if selected. The Dock Security
and Modify Password Mode features are
used to select the operations that will
require a password.
Caution: Be sure to write the password
down and store it in a safe place.
Set
Supervisor
Password
Enter a password of up
to eight alphanumeric
characters.
This option allows you to set a Supervisor
Password that will be required to enter the
System Setup. This password can also be
used in place of the User Password.
Caution: Be sure to write the password
down and store it in a safe place.
Modify
Password
Mode
Password on Boot Only
Password on Boot and
Resume
This option allows you to change the way
the system uses the Password.
When set, you will be prompted for a
password on each system boot.
When set, you will be prompted for a
password each time the system boots or
resumes operation from Suspend mode.
Dock
Security
Enabled
(Requires a User
password to be set.)
Disabled*
This option allows you to enable password
protection for the undocking mechanism
on docked options. When enabled and a
User Password is set, the option cannot be
undocked unless the system is powered on
and the User or Supervisor Password is
supplied.
If the system is not powered on, the option
cannot be undocked when Dock Security
is enabled.
*Factory default setting