Technical data

System BIOS
2–6
DIGITAL HiNote Ultra 2000 Service Guide
Device Features
Feature Settings Comments
Serial Port
•
Disabled
•
Auto*
•
Manual
Disables the onboard Serial Port.
Enables and automatically configures
the port.
Enables and allows you to manually
configure the I/O address and
Interrupt Request (IRQ) line for the
port.
InfraRed
Port
•
Disabled*
•
Auto
•
Manual
Disables the onboard Infrared Port.
Enables and automatically configures
the port.
Enables and allows you to manually
configure the I/O address and
Interrupt Request (IRQ) line for the
port.
Parallel
Port
•
Disabled
•
Auto*
•
Manual
Enables or disables the onboard
Parallel Port.
Enables and automatically configures
the port.
Enables and allows you to manually
configure the I/O address and
Interrupt Request (IRQ) line for the
port.
Parallel
Port Mode
•
Standard
•
Bi-directional (PS/2)*
•
Enhanced Parallel Port (EPP)
•
Extended Capabilities Port (ECP)
Selects proper mode required by your
printer or other parallel port device.
See your device User’s Guide for
details.
Audio
•
Disabled
•
Auto*
•
Manual
Disables the onboard Stereo Audio.
Enables and automatically configures
the onboard audio.
Enables and allows you to manually
configure the I/O addresses, Interrupt
Request (IRQ) line, and DMA
channel for the onboard audio.
Joystick
•
Disabled
•
Auto*
•
Manual
Enables or disables the Joystick Port
on the DIGITAL HiNote Ultra
Multimedia Dock.
Enables and automatically configures
the port.
Enables and allows you to manually
configure the I/O address for the port.
*Factory default setting
______________________________Note ___________________________
It is highly recommended that you use the Auto configure setting. If you must
manually configure a device, it is recommended that you use the “System”
application located in the Windows “Control Panel.”
______________________________________________________________