User`s guide

StorageWorks RAID Array 200 Subsystem Family
Figure 5-6 shows the Define Spare screen. In this example, you can only see Channel
0 because it corresponds to an SWXCR-EA 1-channel controller. If your RAID
subsystem uses an SWXCR-EB 3-channel controller, the display would show channels
0, 1, and 2. Note that the drive in Target ID 4 of channel 0 in this example shows a
drive status of HSP. This drive is defined as the hot spare.
MRO234
Figure 5-6. Define Spare Screen
5-26