User`s guide

StorageWorks RAID Array 200 Subsystem Family
Step
Action
Result
7
If the cursor is not on the Group
Definition menu, press the ESC
key. Then use the arrow keys to
highlight the Arrange Group option
and press the Enter key.
The cursor moves to the drive pictorial
on this screen.
NOTE: In Step 8, when all drive
groups are arranged, the system
returns you to the New
Configuration menu and highlights
the Define Logical Drive option.
8
Use the arrow keys to move the
cursor to a drive in the group you
want to arrange. Press the Enter
key.
•
If you have arranged all drive
groups, see the next section of this
chapter, "Creating a Logical RAID
Drive" for a description of the steps
for this procedure.
•
If you have not arranged all drive
groups, the drive group and size
information for arranged drive
groups is displayed in the table at
the lower-right side of the screen,
as shown in Figure 5-5.
9
Repeat Step 8 for all drive groups.
NOTE: Be careful not to press the
ESC key because you lose the
remaining drive groups and must
recreate them.
When you have set up all your
drive groups, go on to the next step
to create logical RAID drives.
As each drive group is arranged, its
information is added to the table.
To continue the configuration of a new disk array, specify the logical RAID drives.
5-22