User`s guide

Chapter 5
Step
Action
Result
3
Press the Enter key to select the
Create Group option on the menu.
The cursor moves to the drive matrix.
4
Position the cursor on the drive you
want to add to the drive group and
press the Enter key.
Add other drives to the drive group
by repeating this step.
If you plan to specify a hot spare
drive, leave at least one drive of
equal or greater capacity to the other
drives in the RDY (ready) state.
The system adds that drive to the drive
group. The RDY (ready) status next
changes to OPT (optimal). The drive
is assigned a group letter and a
sequence number.
If you assign all the physical devices
to drive groups, the system
automatically highlights the Arrange
Group option and you can continue at
Step 7.
5
To declare the end of the drive
group, press the ESC key.
The system returns to the Group
Definition screen as shown in
Figure 5-5.
6
Repeat Steps 3 through 5 of this
procedure for each additional drive
group.
When you have set up all your drive
groups, go on to the next step to
arrange the groups.
Each new drive group is assigned a
different group letter and the drives in
the group are assigned a sequence
number.
Continued on the next page.
5-21