User`s guide

Chapter 5
Understanding Drive Status
The SWXCR controller assigns a drive status to each SCSI device. The drive status
changes as you use the utilities. The utilities display the drive status as follows.
Display
Drive Status
Meaning
FLD
Failed
The device failed due to errors or you manually
failed it.
FMT
Formatting
The device is formatting.
HSP
Hot spare
The device is configured as a hot spare (within a
redundant RAID configuration) for use in an
automatic rebuild in the event of a failure.
OPT
Optimal
The device is on line and configured for use.
RDY
Ready
The device is spun up and ready to be used by
the controller, but is not configured.
UNF
Unformatted
The device was being formatted and you halted
the format operation.
WOL
Write Only
The device is being rebuilt and is in a write-only
mode.
5-17