User`s guide

StorageWorks RAID Array 200 Subsystem Family
To set the Fault Management option, proceed as follows.
Step
Action
Result
1
Select the Advanced Functions
option from the main menu.
The system displays an Edit/View
Parameter menu.
2
Use the arrow keys to highlight the
Hardware Parameters option and
press the Enter key.
The system displays the current status
of both options, similar to Figure 5-2.
3
Use the arrow keys to highlight the
option and to change the status of
an option, then press the Enter key.
The system toggles the option
between Enable and Disable each
time you press the Enter key.
4
Press the ESC key.
You return to the Edit/View
Parameter menu.
5
Press the ESC key again.
If you changed the status of an
option, save the current status by
selecting the Yes option at the
prompt.
The system returns you to the main
menu.
______________________ NOTE____________________________
Any change to the Fault Management setting becomes effective the next
time the system is rebooted.
5-10