User`s guide

StorageWorks RAID Array 200 Subsystem Family
3. Confirm that jumpers at JP3, JP4, and JP5 (onboard termination enabled) are
installed. See Figure 4-1. If a jumper is missing, you must insert one or
notify your supplier.
Internal
Channel 2
Cache Module
JP3
External
Channel 0
JP4
JP5
Internal
Channel 1
Internal
Channel 0
MR0217
Figure 4-1. Jumper Locations on the 3-Channel Controller
4. Install the RAID controller in the slot you selected when you ran the ECU.
4-2