User`s guide

StorageWorks RAID Array 200 Subsystem Family
______________________ NOTE____________________________
These rules apply to device addresses for the storage pedestal:
•
The default device addresses use the slot number in the storage
pedestal, as shown in Figure 3-10.
•
The available addresses for each slot in the storage pedestal are 0
through 6.
16. Install the labeled drives in the storage pedestals using the configuration
layout shown in Figure 3-10.
17. To support the hot swap option, verify that all power supply SBBs
(BA35X-HA) are Rev. L01 or later.
18. Connect the other end of the ac power cable to an ac power source.
19. Replace the front and rear bezel doors.
20. Power up the storage pedestal.
21. Power up the host system.
3-14