User`s guide

3
Installing the SWXCR-EA 1-Channel
RAID Controller
Introduction
This chapter describes the major steps for installing the 1-channel controller:
•
Installing the 1-channel controller in the host system.
•
Installing the storage pedestal and the disk drives, and connecting the cables.
Installing the 1-Channel RAID Controller
_____________________ CAUTION ___________________________
To avoid static damage, follow adequate antistatic procedures when you
handle the RAID controller.
To install the RAID controller, follow these steps.
1. Refer to your host system manual for general instructions on installing
adapters.
2. Unpack the RAID controller.
3-1