User`s guide

StorageWorks RAID Array 200 Subsystem Family
13. Select the View or edit details option (Step 3 in this example) and press the
Enter key. Scroll through the file until you find the slot number for the
controller you are installing. The information display for a 1-channel board
installation is similar to the following.
______________________ NOTE____________________________
The slot you are looking for has the "Added" identifier on the right side of
the screen display.
Slot 6 - Digital SWXCR-EA (1-ch) EISA RAID Cntlr (Generic) Added
disk spin-up options.............................................2 disks started every 6 secs-
Default
Channel 0 tag-queuing (SCSI-2)..........................Enable tag-queuing - Default
Channel 0 transfer-rate (max)..............................Synchronous, 10 MB/s (FAST) -
Default
BIOS (16K) Base Address...................................0CC000H - Default
Interrupt...............................................................Interrupt 11 (edge) - Default
Edit=ENTER <Edit Resources=F6> <Advanced=F7> <Done=F10>
The display for a 3-channel board installation differs slightly.
2-10