User`s guide

StorageWorks RAID Array 200 Subsystem Family
11. Select the slot where you want to install the controller (the slot is highlighted)
and press the Enter key. The following example shows that Slot 6 is selected
for the installation.
Step 2: Add or remove boards Help=F1
Listed are the boards and options detected in your computer.
♦
To add boards or options which could not be detected, or which you
plan to install, press the Insert key.
♦
To move the highlighted board to another slot, press the F7 key.
♦
To remove the highlighted board from the configuration, press the Del
key.
When you have completed this step, press the F10 key.
Slot 1 (Empty)
Slot 2 DPT SCSI Host Bus Adapter (PM2012B2/9X)
Slot 3 (Empty)
Slot 4 (Empty)
Slot 5 (Empty)
Slot 6 Digital SWXCR-EA (1-ch) EISA RAID Cntlr (Generic)
Add=INSERT <Remove=DEL> <Move=F7> <Done=F10>
2-8