User`s guide

Chapter 2
9. Remove the Standalone RAID Array 200 Software diskette, insert the ECU
diskette, and press the Enter key. An add confirmation message, similar to
the following, displays on your screen.
Step 2: Add or remove boards
Add confirmation
Board Name: Digital SWXCR-EA (1-ch) EISA RAID Cntlr (Generic)
Ok=ENTER <Cancel=ESC>
10. Press the Enter key to confirm the .CFG file. A message similar to the
following displays on your screen.
Add
Select an acceptable slot for the board and press ENTER.
Slot 1 (Empty)
Slot 2 DPT SCSI Host Bus Adapter (PM2012B2/9X)
Slot 3 (Empty)
Slot 4 (Empty)
Slot 5 (Empty)
Slot 6 (Empty)
The ( ) indicates an acceptable slot for the board
>Ok=Enter< <Cancel=ESC>
2-7