User`s guide

Chapter 2
•
If you are installing an SWXCR-EA 1-channel controller, you need
one empty EISA slot.
•
If you are installing an SWZCR-EB 3-channel controller, you need
two empty EISA slots in close proximity for cabling purposes during
the hardware installation.
6. Use your arrow keys to select an empty slot for the 1-channel controller (or
two slots for the 3-channel controller) and press the Insert key. The
following menu displays on your screen.
Step 2: Add or remove boards Help=F1
Add
To add a board to the list, you must locate the diskette containing the boards
configuration (.CFG) file.
•
If there is an option configuration diskette included with your board or option,
insert that diskette and press ENTER.
•
CFG files for many popular boards are on the SYSTEM CONFIGURATION
diskette. To look for your .CFG file there, press ENTER.
•
Other .CFG files are contained on the .CFG FILE LIBRARY diskette. To look
for your .CFG file there, insert that diskette and press ENTER.
>
Ok=ENTER
<
<Cancel=ESC>
Note that you are doing the first item on the bulleted list.
Use the .CFG file on the Standalone RAID Array 200 Family Software
diskette instead of any versions that may be on your system ECU diskette.
2-5