User`s guide

StorageWorks RAID Array 200 Subsystem Family
5. A message similar to the following displays on your screen listing the current
EISA boards in your system. Look at your host system and find the empty
EISA slots.
______________________ NOTE____________________________
The ECU screen displays only the EISA slots, not the ISA slots. The
display may indicate that a slot is empty while in fact the board slot
actually contains an ISA board. You must look at the slots.
Step 2: Add or remove boards Help=F1
Listed are the boards and options detected in your computer.
♦
To add boards or options which could not be detected, or which you
plan to install, press Insert Key.
♦
To move the highlighted board to another slot, press the F7 key.
♦
To remove the highlighted board from the configuration, press the Del
key.
When you have completed this step, press the F10 key.
Slot 1 (Empty)
Slot 2 DPT SCSI Host Bus Adapter (PM2012B2/9X)
Slot 3 (Empty)
Slot 4 (Empty)
Slot 5 (Empty)
Slot 6 (Empty)
Add=INSERT <Remove=DEL> <Move=F7> <Done=F10>
2-4