User`s guide

Chapter 6
Error/Problem
Possible Cause(s)
Action(s) To Take
Installation Abort
(continued)
•
Check configuration by
running the utilities:
The utility provides you a display
of the current drive and RAID
logical drive status. Determine the
corrective action needed on the
drives.
You can choose to quit or save the
current configuration.
To quit, press the ESC key.
To save the current configuration,
press the S key. (This updates the
controller 's configuration with the
current state of the drives and
RAID logical drives.)
You can choose to ignore the
configuration error to start a new
configuration. This can be done by
overriding the display process by
entering the following:
SWXCRMGR -o
You have the option of quitting
from the utility or saving the new
configuration.
Warning: If you save this
configuration you will lose your
data.
Continued on the next page.
6-21