User`s guide

Chapter 5
Updating the Firmware on an AXP System
For AXP systems, consult your AXP system documentation to invoke this boot menu.
ARC Multiboot DEC Version 2.07
Copyright (c) 1993 Microsoft Corporation
Copyright (c) 1993 Digital Equipment Corporation
Boot Menu
Boot Windows NT
Boot an alternate operating system
Run a program
Supplementary menu ...
Use the arrow keys to select, then press Enter.
1. Insert the Standalone RAID Array 200 Software Vx.x for AXP
Systems diskette into your floppy drive.
2. To select the Run a program option, use the arrow key and press the
Enter key. The system displays a prompt.
3. To run the utilities from the A: drive, do the following:
For a single controller, type this command:
Program to Run: A:SWXCRFW SWXCRFW.nnn
where nnn refers to the firmware version you want to load.
For two controllers, type this command:
Program to Run: A:SWXCRFW SWXCRFW.nnnSWXCRFW.nnn
where nnn refers to the firmware version you want to load.
5-53