User`s guide

StorageWorks RAID Array 200 Subsystem Family
Updating the Firmware
To update your controller's firmware, proceed as follows.
Updating the Firmware on an Intel System
To update your firmware on an Intel system, insert the standalone RAID Array 200
Software Vx.x for Intel Systems diskette into your floppy drive and boot from that
drive.
For a single controller, type this command:
A:\SWXCR>SWXCRFW SWXCRFW.nnn
where nnn refers to the firmware version you want to load.
For two controllers, type this command:
A:\SWXCR>SWXCRFW SWXCRFW.nnn SWXCRFW.nnn
where nnn refers to the firmware version you want to load.
The system displays these messages:
****************************************************************
SWXCR Firmware Download Utility (V2.21, Jun 02, 1993)
****************************************************************
This utility is used to upgrade the firmware on the SWXCR
controller.
****************************************************************
SWXCR Controller supporting 7 targets per channel found at slot 3
5-52