User`s guide

Chapter 5
Updating the BIOS
You do not need to update the BIOS for AXP systems.
To update your BIOS on an Intel system, insert the standalone RAID Array 200
Software Vx.x for Intel Systems diskette in your floppy drive and boot from that
drive.
For a single controller, type this command:
A:\SWXCR>SWXCRBIO SWXCRBIO.nnn
where nnn refers to the BIOS version you want to load.
For two controllers, type this command:
A:\SWXCR>SWXCRBIO SWXCRBIO.nnn SWXCRBIO.nnn
where nnn refers to the BIOS version you want to load.
The system displays these messages.
SWXCR BIOS Write Utility Ver. 1.0 - January 4, 1993
Mylex Corporation
Writing EEPROM ...
Verifying EEPROM ...
SWXCR BIOS Write Completed
Press any key to reboot the system
5-51