User`s guide

About this Guide
Organization
This guide contains the following:
•
Chapter 1: Product Description —
Provides an overview of the StorageWorks
RAID Array 200 Subsystem including features, configurations, and system
requirements. A RAID overview is also provided.
•
Chapter 2: Running the EISA Configuration Utility (ECU)—
Describes how you
verify the availability of user-supplied hardware and software, how you inventory
what you received with the StorageWorks RAID Array 200 Subsystem and how
you run the ECU.
•
Chapter 3: Installing the SWXCR-EA 1-Channel Controller—
Describes how you
install the RAID controller in your host system and install the storage pedestal
and disk drives and connect the cables.
•
Chapter 4: Installing the SWXCR-EB 3-Channel Controller—
Describes how you
install the RAID controller in your host system and install the storage pedestals
and disk drives and connect the cables.
•
Chapter 5: Using the Standalone RAID Configuration Utility—
Includes
background information, system requirements, information on how you invoke
the utilities, configuration, and array maintenance information.
•
Chapter 6: Troubleshooting and Service Information—
Describes the status of the
SBB LED indicators and how you replace the components in the pedestal. It
presents a brief troubleshooting approach in the event of a pedestal component
malfunction and software errors and recovery actions for those errors.
•
Appendix A: Specifications—
Includes physical and environmental specifications
for the StorageWorks RAID Array 200 Subsystem Family.
•
Appendix B: Illustrated Parts List—
Includes the replacement part numbers and an
illustration of the StorageWorks storage pedestal.
•
Appendix C: MS-DOS Verification Procedure—
Contains a verification procedure
to test your RAID subsystem under the MS-DOS operating system.
xi