User`s guide

Chapter 5
Restoring the Subsystem Configuration from a Diskette
To restore your configuration information due to RAID controller replacement, use
the file containing the configuration you saved on a diskette (the procedure for saving
your configuration information was described earlier in this chapter).
To restore the configuration, proceed as follows.
Step
Action
Result
1
Insert the diskette.
2
Select the Tools option from the
main menu.
The system displays the Tools
menu as shown in Figure 5-7.
3
Select the Backup/Restore option.
The system warns you of the
result.
4
Press any key to continue.
The system prompts you for a file
name.
5
Enter the name of the file with the
configuration information.
The system asks if you want to
restore the configuration.
6
Select Yes.
The system reports that the file has
been restored and asks you again to
confirm that you want to restore
the configuration.
7
Select Yes.
The system reports that the
contents of the file has been
written to the RAID controller's
memory. When the process is
complete, the system reports
success.
8
Press the ESC key to exit from the
display.
5-49