User`s guide

Chapter 6. Configuring Your Array
EK–SWRA2–IG. C01 6–11
6.3.1.3 Setting the Startup Parameters
To set the Startup Parameters, follow these steps.
1. Use the arrow keys to highlight the Startup Parameters option on the
Edit/View Parameters menu and press the Enter key. The Start up
Parameters menu appears, with the Spin up option highlighted shown in
Figure 6–8.
Figure 6–8 The Start Up Parameters Menu
2. The Spin up option specifies whether the controller tells the drives when to
spin up or whether the drives spin up on power up. The Spin up option is set
to automatic by default. This setting causes the controller to startup the
devices. Press the Enter key to change the setting to On Power, which causes
the drives to spin up on power up.