User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
5–12 EK–SWRA2–IG. C01
Cabling external to the Expansion Storage Pedestal cannot exceed 2 meters. The
Expansion Storage Pedestal has an internal wiring length of approximately 1
meter, therefore, the external cabling cannot exceed 2 meters. There are three
methods of routing the cable within the pedestal. Read each cable installation
procedure and then choose the best one for your location, depending upon the
length of the cable used and the appearance desired.
Figures 5–9 and 5–10 show the cables and connections required to connect the
EISA and PCI RAID 3-channel controller to the Expansion Storage Pedestal.
Figure 5–9 External Cable Connections — EISA