User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
3–8 EK–SWRA2–IG. C01
Figure 3–7 The Add Slot Screen
Add
Select an acceptable slot for the board and press ENTER.
Slot 1(Empty)
Slot 2(Empty)
Slot 3(Empty)
Slot 4(Empty)
Slot 5(Empty)
Slot 6(Empty)
The ( ) indicates an acceptable slot for the board
>Ok=Enter<<Cancel=ESC>
7. Select the slot where you want to install the controller (the slot appears
highlighted) and press the Enter key. Figure 3–8 shows Slot 6 selected for
the installation.