User`s guide

Chapter 3. Updating EISA Information
EK–SWRA2–IG. C01 3–7
Figure 3–5 The Insert Diskette Screen
Destination Diskette
Insert the SYSTEM CONFIGURATION diskette.
Ok=ENTER <Cancel=ESC>
5. Remove the RAID Array 200 Management Utility diskette, insert the ECU
diskette, and press the Enter key. The ECU displays an add confirmation
screen similar to Figure 3–6.
Figure 3–6 The Add Board Confirmation Screen
Step 2: Add or remove boards
Add confirmation
Board Name:Digital SWXCR-EA (1-ch) EISA RAID Cntlr
(Generic)
Ok=ENTER <Cancel=ESC>
6. Press the Enter key to confirm the .CFG file. The ECU displays an add slot
screen similar to Figure 3–7.