User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
3–6 EK–SWRA2–IG. C01
Figure 3–4 The Add Configuration File Screen
Step 2: Add or remove boardsHelp=F1
Add Configuration (CFG) file
Select a file to add.
Directory: A:\*.CFG
!MLX0077.CFG Digital SWXCR-EA (1-ch) EISA RAID Cntlr
(Generic)
!MLX0075.CFG Digital SWXCR-EB (3-ch) EISA RAID Cntlr
(Generic)
AMLX0077.CFG SWXCR-EA (1-ch) EISA RAID Cntlr for OSF, VMS
AMLX0075.CFG SWXCR-EB (3-ch) EISA RAID Cntlr for OSF, VMS
Select=ENTER (Sort=F6) (Directory=F7) (Cancel=ESC)
4. Select the appropriate .CFG file for your RAID controller as follows and
press the Enter key:
• Select !MLX0077.CFG for a 1-channel controller in an Intel-based computer
running any operating system, or installed in an Alpha running Microsoft
Windows NT for AXP systems
• Select !MLX0075.CFG for a 3-channel controller in an Intel-based computer
running any operating system, or installed in an Alpha running Microsoft
Windows NT for AXP systems
• Select AMLX0077.CFG for a 1–channel controller in an Alpha running
OpenVMS for AXP systems, or DEC OSF/1
• Select AMLX0075.CFG for a 3–channel controller in an Alpha running
OpenVMS for AXP systems, or DEC OSF/1
The utility displays a screen similar to Figure 3–5.