User`s guide

Chapter 3. Updating EISA Information
EK–SWRA2–IG. C01 3–5
2. Use your arrow keys to select an empty slot for the 1-channel controller and
press the Insert key. The ECU displays a screen similar to Figure 3–3.
Figure 3–3 The Add Board Screen
Step 2: Add or remove boardsHelp=F1
Add
To add a board to the list, you must locate the diskette
containing the boards configuration (.CFG) file.
• If there is an option configuration diskette included
with your board or option, insert that diskette and press
ENTER.
• CFG files for many popular boards are on the SYSTEM
CONFIGURATION diskette. To look for your .CFG file there,
press ENTER.
• Other .CFG files are contained on the .CFG FILE LIBRARY
diskette. To look for your .CFG file there, insert that
diskette and press ENTER.
>Ok=ENTER<<Cancel=ESC>
3. Remove the ECU diskette and insert the RAID Array 200 Standalone
Configuration Utility diskette for your operating system (this diskette
contains the .CFG files) and press the Enter key. The ECU displays an add
configuration file screen similar to Figure 3–4.
NOTE
The .CFG file on the RAID Array 200 Standalone
Configuration Utility diskette is the most current
.CFG file. Use this instead of any versions that
may be on your system ECU diskette.